1. In order to ensure safe and normal use of the equipment, more than 6 square cables must be used for the incoming line. The input end is equipped with 40A leakage switch;
2. Ensure the equipment is reliably grounded.
The principle of overview
Charging pile product parameters
1. Input/output voltage: single-phase 220V plus or minus 10%
2. Input/output current: no more than 32A
3. Output power: less than or equal to 7kW
4. Rated ac frequency: 50Hz plus or minus 1Hz
5. Protection grade: IP54
6. Working environment temperature: - 20 ℃ ~ + 55 ℃
7. Relative humidity: 5% ~ 95%
8. Altitude: less than or equal to 2000m
9. Average time between failures: greater than or equal to 8760h
1. Intelligent charging, safe and reliable, no manual duty, rich protection and anti-theft functions;
2. It has the functions of leakage, short-circuit, overvoltage, undervoltage and overcurrent, and has complete protection functions to ensure the safe and reliable operation of charging piles and extend the life of the battery;
3. When charged, the charging will stop automatically.
Small in size and light in weight.
1. Do not put inflammable, explosive or combustible materials, chemicals, combustible gases and other dangerous goods near the charging pile;
2. Keep the charging gun head clean and dry. If there is any dirt, please wipe it with a clean dry cloth.
3. It is strictly prohibited to use charging piles in case of defects, cracks, abrasions, cracks, or exposed charging cables of charging gun or charging cable. If found, please contact the staff immediately.
4. Please do not try to remove the pile, maintenance, modification charge, if any maintenance, modification requirements, please contact the working staff, improper operation may cause the charging pile damage, leakage, leakage, and so on and so forth;
5. It is strictly prohibited to pull out and remove the gun head during charging to ensure the safety of people and vehicles during charging;
6. In case of any abnormal situation during the use, press the emergency stop button immediately to cut off all the input and output power;
7. In case of rain and thunder, please charge it carefully.
8. Keep away from children during charging to avoid injury;
9. During the charging process, the vehicle is prohibited from driving and can only be charged when it is still; Please turn off the electric car before charging it.
1. Confirm that all lines have been connected correctly, turn on the main switch of charging pile, and check whether the power lamp is on after electrification.
2. Plug in the charging gun, pay attention not to insert the charging gun backwards (long pile short car), and check whether the connection light is on.
3. Use the IC card given to swipe the card in the card area to check whether the charging lamp is on.
4. Start charging and see if there is any current and voltage display on the dashboard of the car. All above can be used normally.
5. Charging is OK, swipe the card to stop charging, and pull out the charging gun.
Customer service hotline：400-840-6128
Address: automotive industrial park, baoji high-tech zone, shaanxi province